Authors

Adewale Oluwaseun

Schools of Electrical Systems Engineering (SESE), Federal University of Technology Akure (FUTA), Akure, Ondo State, Nigeria

Olufemi Adekunle

School of Computing, Federal University of Technology Akure (FUTA), Akure, Ondo State, Nigeria

Abstract

Nigeria continues to face persistent challenges in energy generation, transmission, and distribution, resulting in frequent power shortages and reliance on fossil-fuel-based generators. Exploring alternative renewable energy sources is therefore essential for sustainable national development. This paper examines piezoelectric energy harvesting as an underutilized yet promising renewable energy option in Nigeria. Piezoelectric materials generate electrical energy when subjected to mechanical stress such as vibrations, pressure, or motion. The study reviews the principles of piezoelectric energy harvesting, its global applications, and its relevance to Nigeria’s infrastructure and transportation sectors. The analysis indicates that piezoelectric systems can provide decentralized, low-cost, and sustainable power for small-scale applications such as street lighting, sensors, and smart transportation. The paper further identifies technological, economic, and infrastructural barriers to adoption, while highlighting opportunities in local manufacturing, research collaboration, and startup ecosystems. With appropriate policy support, investment, and interdisciplinary collaboration among universities, government, and private industries, piezoelectric energy harvesting could contribute meaningfully to Nigeria’s energy mix and sustainable development goals.

Keywords

Sustainable Energy Generation Vehicular Motion Motion-Based Energy Harvesting Harvesting Techniques Highways sustainable power

Citation of this Article

Adewale Oluwaseun, & Olufemi Adekunle. (2026). Sustainable Energy Generation from Highways Using Vehicular Motion-Based Energy Harvesting Techniques. International Current Journal of Engineering and Science (ICJES), 5(2), 15-23. Article DOI: https://doi.org/10.47001/ICJES/2026.502004

Licence Copyright (c) 2026 International Current Journal of Engineering and Science. This work is licensed under a Creative Commons Attribution Non Commercial 4.0 International Licence.

References

  1. Li, Q., Lehmhus, D., Liu, M., Zhang, Q., Huyaidy, M. Y., & Xu, X. (2022). Piezoelectric energy harvesting technology: From materials, structures, to applications. Smart and Sustainable Technology for Resilient Water Management, 1(1), 100128. https://doi.org/10.1002/sstr.202100128
  2. Moussa, R. R., Ismaeel, W. S. E., & Solban, M. M. (2022). Energy generation in public buildings using piezoelectric flooring tiles: A case study of a metro station. Energy Reports, 8, 5099–5110. https://doi.org/10.1016/j.egyr.2022.03.037
  3. Nyarko, K., Whale, J., & Urmee, T. (2023). Drivers and challenges of off-grid renewable energy-based projects in West Africa: A review. Renewable Energy, 208, 102450. https://doi.org/10.1016/j.renene.2023.02.070
  4. Oguntosin, V., & Ogbechie, P. (2023). Design and construction of a foam-based piezoelectric energy harvester. Next Energy, 1(4), 100070. https://doi.org/10.1016/j.next.2023.100070
  5. Olivier, D. N., Wang, W., Liu, C., Wang, Z., & Ding, B. (2024). Survey on energy harvesting for biomedical devices: Applications, challenges and future prospects for African countries. Renewable Energy, 208, 376881590. https://doi.org/10.1016/j.renene.2024.118543
  6. Onuu, M. U. (2020). Acoustic energy harvesting in Nigeria: Prospects, technical problems and socio-economic obstacles. Renewable Energy, 157, 1108–1118. https://doi.org/10.1016/j.renene.2020.05.021
  7. Paradiso, J. A., & Starner, T. (2005). Energy scavenging for mobile and wireless electronics. IEEE Pervasive Computing, 4(1), 18–27. https://doi.org/10.1109/MPRV.2005.9
  8. Priya, S., & Inman, D. J. (2009). Energy harvesting technologies. Springer. https://doi.org/10.1007/978-0-387-76464-1
  9. Roundy, S., Wright, P. K., & Rabaey, J. (2003). A study of low level vibrations as a power source for wireless sensor nodes. Computer Communications, 26(11), 1131–1144. https://doi.org/10.1016/S0140-3664(02)00248-7
  10. West African Development Bank Reports on Renewable Innovation Programs, 2021.
  11. Collaborative Policy and Technology Transfer Frameworks for Energy Harvesting Integration [20; 21].
  12. Sezer, N., & Koç, M. (2021). A comprehensive review on the state-ofthe-art of piezoelectric energy harvesting. Nano Energy, 80, 105567. https://doi.org/10.1016/j.nanoen.2020.105567
  13. Uzoechina, G., Olowa, O., & Onah, C. (2018). Gaps and strategies in developing health research capacity: Experience from a Nigeria–Canada collaboration. Health Research Policy and Systems, 16(1), 10. https://doi.org/10.1186/s12961-018-0289-
  14. S. Priya and D. J. Inman, Energy Harvesting Technologies, Springer, 2009.
  15. Khaligh and O. C. Onar, Energy Harvesting: Solar, Wind, and Ocean Energy Conversion Systems, CRC Press, 2010.
  16. Roundy, Wright, and Rabaey, “A Study of Low Level Vibrations as a Power Source for Wireless Sensor Nodes,” Computer Communications, 2003.
  17. International Energy Agency (IEA), “Africa Energy Outlook,” 2022.
  18. World Bank, “Nigeria Power Sector Recovery Program,” 2021.
  19. Sodano et al., “A Review of Power Harvesting from Vibration Using Piezoelectric Materials,” The Shock and Vibration Digest, 2004.
  20. Jaffe, Cook, and Jaffe, Piezoelectric Ceramics, Academic Press.
  21. Li, Q., Lehmhus, D., Liu, M., Zhang, Q., Huyaidy, M. Y., & Xu, X. (2022). Piezoelectric energy harvesting technology: From materials, structures, to applications. Smart and Sustainable Technology for Resilient Water Management, 1(1), 100128. https://doi.org/10.1002/sstr.202100128
  22. Moussa, R. R., Ismaeel, W. S. E., & Solban, M. M. (2022). Energy generation in public buildings using piezoelectric flooring tiles: A case study of a metro station. Energy Reports, 8, 5099–5110. https://doi.org/10.1016/j.egyr.2022.03.037
  23. Nyarko, K., Whale, J., & Urmee, T. (2023). Drivers and challenges of off-grid renewable energy-based projects in West Africa: A review. Renewable Energy, 208, 102450. https://doi.org/10.1016/j.renene.2023.02.070
  24. Oguntosin, V., & Ogbechie, P. (2023). Design and construction of a foam-based piezoelectric energy harvester. Next Energy, 1(4), 100070. https://doi.org/10.1016/j.next.2023.100070
  25. Olivier, D. N., Wang, W., Liu, C., Wang, Z., & Ding, B. (2024). Survey on energy harvesting for biomedical devices: Applications, challenges and future prospects for African countries. Renewable Energy, 208, 376881590. https://doi.org/10.1016/j.renene.2024.118543
  26. Onuu, M. U. (2020). Acoustic energy harvesting in Nigeria: Prospects, technical problems and socio-economic obstacles. Renewable Energy, 157, 1108–1118. https://doi.org/10.1016/j.renene.2020.05.021
  27. Paradiso, J. A., & Starner, T. (2005). Energy scavenging for mobile and wireless electronics. IEEE Pervasive Computing, 4(1), 18–27. https://doi.org/10.1109/MPRV.2005.9
  28. Priya, S., & Inman, D. J. (2009). Energy harvesting technologies. Springer. https://doi.org/10.1007/978-0-387-764r64-1
  29. Roundy, S., Wright, P. K., & Rabaey, J. (2003). A study of low level vibrations as a power source for wireless sensor nodes. Computer Communications, 26(11), 1131–1144. https://doi.org/10.1016/S0140-3664(02)00248-7
  30. Sezer, N., & Koç, M. (2021). A comprehensive review on the state-ofthe-art of piezoelectric energy harvesting. Nano Energy, 80, 105567. https://doi.org/10.1016/j.nanoen.2020.105567
  31. Uzoechina, G., Olowa, O., & Onah, C. (2018). Gaps and strategies in developing health research capacity: Experience from a Nigeria–Canada collaboration. Health Research Policy and Systems, 16(1), 10. https://doi.org/10.1186/s12961-018-0289-
  32. UNEP, “Renewable Energy and Sustainability in Developing Nations,” 2020.